NewAge Products PRO 3.0 Serie Manuel D'installation page 22

Installing Corner Worktop
Parts Needed.
Attach top to one cabinet using 1/4" x
2
5/8 hex bolts, nuts, and washers.
Slide in corner and attach
4
remaining cabinets.
Note:
On adjacent edges attach 2 support
1
brackets to underside of corner top
using the supplied (4) 38 x 5/8" screws.
6"
or
4"
Important:
op flush with fr
ner and flush with edge
3
Attach second cabinet to top.
X2
6"
or
4"
op flush with back of