Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
displays first phone-book
entry.
5. Press
or
to search the
phone-book and select an
entry for editing.
6. Press
to confirm.
7. To change name, press
to delete one letter at a time;
type in a new name.
8. Press
to save the new
name.
9. Press
or
to move
the blinking cursor to the
appropriate digit and then
press
to delete that digit.
10. Type in a new digit if
appropriate.
11. Press
to save the phone
number.
.
12. Screen displays "MELODY"
and sounds a ring tone.
13. Press
to save the ring
tone; screen displays "EDIT
RECORD" again.
14. Press
to end editing, or go
to Step 4 above and repeat on
another entry.
25. DELETE / DELETE ALL PHONE-
BOOK ENTRIES
1. While off-line, press
key
and then
key to scroll to
"PHONE -BOOK".
2. Press
key to confirm.
Screen displays "LIST".
3. Press
key to scroll to "DEL
RECORD" (or "DELETE ALL).
4. Press
key to confirm.
Screen displays first phone-
16
book entry.
5. Press
or
to search the
entire phone-book and select
an entry to delete.
6. Press
to confirm a
selection. Screen displays
"CONFIRM ?".
7. Press
again to confirm.
8. Press
to end.
26. REVIEW MEMORY STATUS
(PHONE-BOOK)
1. While off-line, press
and
then
to scroll to "PHONE
-BOOK".
2. Press
key to confirm.
Screen displays "LIST". Press
key a few times to display
"MEM STATUS".
3. Press
key to confirm.
Screen displays memory
status as (xxx / 150).
4. Where 150 is the maximum
number of entries and xxx
represents the actual entries.
5. Press
to end.
TELEPHONE ANSWERING MACHINE
(TAM) BASIC INFORMATION
There are approximately 22
minutes of total recording time.
The maximum length of each
message or memo is limited to
3 minutes, and the maximum
number of recorded messages
is 50. The answering machine is
ready to use with the following
default settings:
1. English is the default voice
prompt.
2. Greeting message (OGM
1): "Your call can not be
answered at the moment.
Please leave a message after
the tone".
3. Answers all incoming calls on
the 4th ring.
4. No time stamping on new
messages unless you have
subscribed to phone company
CID service or you have set
the date / time function.
5. Remote Code (password) for
remote message retrieval is "0
0 0 0".
6. The following display
characters (or messages) are
used by TAM:
• CA = Call (new call ringing)
• An = Answering (TAM is
answering)
• rE = Recording (recording
a memo or OGM)
• SP = Speaker
(speakerphone mode)
• rA = Remote Access (TAM
is being accessed
remotely)
• UU = Mute (microphone is
muted in speakerphone
mode)
• rg = Registration
(registration mode for
handset)
• r4 = Set to answer in 4
rings
• PA = Pause
• A1 = Answering message 1
English
(OGM 1)
• A2 = Answering message 2
(OGM 2)
• L1 to L9 = volume level 1
to 9
• HS = Paging Handset
• HS = Handset is accessing
TAM function
• PL = Please set date and
time,
• FU = Answering machine is
full
27. ANSWER MACHINE ON/OFF
1. Press
key to choose
Answer On/Off
between answer machine On
or Off. It will announce
"Answer On" or "Answer
OFF".
2. If the machine is off, a "- -"
will be shown on the digital
display.
3. If the machine is on, the digital
display shows "0 0 " or the
number of message received.
(A flashing display indicates
the number of new messages
received; a non-flashing
display indicates the number
of saved messages.)
28. SELECTING A FACTORY OUT-
GOING MESSAGE (OGM)
Two factory OGMs are provided
for greeting. The user can
select either OGM 1 or OGM 2
as greeting message. (Factory
default is OGM 1.)
OGM 1: "Your call can not be
Publicité
Chapitres
Table des Matières
Dépannage
