General Procedures To Select Tam Menu Options; Tam Menu Flow Chart For Reference; Message Playback; Set Remote Code For Remote Message Retrieval - Serene CL-60A Manuel D'utilisation

machine operations can also
be performed from CL-60A
handset. All operations are listed
in "MENU" mode under "TAM"
option.
41. GENERAL PROCEDURES TO
SELECT TAM MENU OPTIONS
1. While off-line, Press key
on CL-60AP handset to enter
menu mode.
2. Press key until you see
"TAM" on the screen display.
Press key to select.
3. The screen displays
"MESSAGE". Press key
to scroll through all TAM menu
options (MESSAGE, OGM,
and TAM SETTING). Press
key to select a sub-menu
option for additional choices.
Menu options Sub-Menu
options
1. MESSAGE: Play New
MSG, Delete
All MSG,
Record
Memo, Play
Saved MSG
2. OGM: OGM 1, OGM
2 (Play OGM,
Record a new
OGM, Select
factory
Default
OGM).
3. TAM TAM On/Off,
SETTING: TAM Alert
22
ON/OFF, Set
OGM, Set
Ring, TAM
Voice,
Remote Code
(default
"0000"), TAM
Default
Note:
o "TAM On / Off" is for setting
TAM on or off from CL-60AP
handset.
o "TAM Alert" is for setting
new message audio alert
on or off (beeps once every
30-seconds when there are
new messages)
o "Set OGM" is for selecting
which OGM as the greeting
message.
o "Set Ring" is for setting the
number of rings before TAM
answers.
o "TAM Voice" is for selecting
TAM voice prompts in either
English, French, or Spanish.
o "Remote Code" is for setting
the password for remote
message retrieval (default is
"0000").
o "TAM Default" is for resetting
TAM back to the factory
settings (English voice
prompt, 4-rings, set OGM 1 as
the greeting message, delete
all messages).
42. TAM MENU FLOW CHART FOR
REFERENCE
NEW MSG
MESSAGE
ENTER
"TAM"
MENU
OGM 1
OGM
OGM 2
TAM TAM ON /
SETTING OFF

43. MESSAGE PLAYBACK

While playing back a message on
CL-60AP handset, the following
keypad commands are available
to repeat, skip or delete a
message:
1. Press "1" key to repeat
message.
2. Press "2" key to pause or
resume message playback.
3. Press "3" key to skip
message.
4. Press "5" key to delete current
message.
44. SET REMOTE CODE FOR REMOTE
MESSAGE RETRIEVAL
A remote code (password) is
required to do remote message
retrieval while away. The factory
default remote code is "0000".
English
SAVED
MEMO
MSG
PLAY RECORD. DEFAULT
TAM ALERT SET OGM SET RING
REMOTE TAM
TAM VOICE
CODE DEFAULT
1. With CL-60A handset off-line,
Press to enter the menu
mode.
2. Press once to see TAM.
Press to select.
3. The Screen displays
"Message". Press two
times to find "TAM SETTING".
Press to select.
4. "TAM ON/OFF" should
appear, Press five times to
find "REMOTE CODE". Press
to select.
5. The default code is "0000".
You can change it to any
4-digit code. Then press
to confirm and save.
ANSWERING MACHINE REMOTE
OPERATION WHILE AWAY