Handset Menu Flow Chart; Answering A Call; Speakerphone; Making A Call - Serene CL-60A Manuel D'utilisation

8. HANDSET MENU FLOW CHART

Received
Dialed
New entry
Edit record
Delete record
Delete all
Memory status
Delete HS
Ring set-up Melody & Volume
Dial mode Tone or Pulse
Flash time 300 or 600 milliseconds
Modify PIN (Default PIN = "0000")
BS default setting
Audio set-up
Ring setup
Tone setup
Language
HS name
Auto answer
Barring (block calls)
Date & Time
Area Code
HS default setting
Select base (Base1, Base2, Base3, Base 4)
Base 1
Base 2
Base 3
Base 4
Message New MSG
Saved MSG
Memo
Delete All
OGM 1
OGM
OGM 2
TAM Settings
12
Speaker Volume (1, 2, 3, 4, 5)
Receiver Volume (1, 2, 3, 4, 5)
Auto-Amplify (ON / OFF)
Talking Keypad (ON / OFF)
Talking CID (ON / OFF)
Int ring ---(Melody & Volume)
Ext ring---(Melody & Volume)
Key tone, Battery Low tone, Range Alarm tone (On / Off)
English, French, Spanish
ON / OFF
Enter "####" to block
Time format (12/24), Set time, Set date
TAM On/Off
TAM Alert
Set OGM
Set Ring
TAM Voice (language)
Remote Code
TAM Default

9. ANSWERING A CALL

1. Press key when phone
rings.
2. (Press again to engage
speakerphone if need).
3. Press key to end the call.

10. SPEAKERPHONE

1. Press key twice to turn on
the speaker.
2. Press key again to toggle
back to handset receiver.

11. MAKING A CALL

1. Enter phone number and
confirm on display.
2. Press key to go on-line and
dial.
3. (Press again to engage
speakerphone if need).
4. Press key to end the call.

12. CALL WAITING

You must subscribe to Call
Waiting service from your local
phone company in order to enjoy
this convenience.
1. While on a call and there is a
new call coming in, you will
hear a short beep tone in your
receiver signifies a new call is
waiting.
2. Press the key once and it
will switch you to the second
party and place the first party
on hold.
3. If you want to go back to the
first party, press the key
again.
English

13. HANDSET MUTE

1. While on a call, press to
mute the handset for privacy.
2. Press again to un-mute.
14. VOLUME CONTROL (RECEIVER
AND SPEAKERPHONE)
While on a call, press key
on the handset (side) to change
volume setting. Volume setting
is indicated as VL1 to VL5 on
screen.

15. AMPLIFY FUNCTION

1. While on a call, press
key to add an extra level of
amplification (35 dB) to the
receiver volume. This is
indicated by an illuminated
button. Digital tone control
becomes active in this mode.
Please use Tone/Up and Tone/
Down keys to adjust for best
voice clarity.
2. Press key again to disable
the extra lever of amplification
(35 dB). Tone control
becomes inactive when
function is off.
16. AUTOMATIC & TALKING
FUNCTION SWITCHES
The function can be set to ON
automatically each time the phone
is being used. This automatic
ON setting is best suited if
there are only hard-of-hearing
users on this phone.
Warning: if there are both normal