Time Format Setting; Date & Time Setting; Restore Handset Default Setting; Restore Base Default Setting - Serene CL-60A Manuel D'utilisation

mode.

55. TIME FORMAT SETTING

Either 12 or 24 hour format is
supported.
1. While off-line, press key
and it displays "CALL LOG".
2. Press or key to scroll to
"HS SETTINGS"
3. Press key to confirm.
4. Press or key to scroll to
"DATE & TIME" and press
to confirm.
5. Press key and then the
screen displays "TIME FORM"
6. Press key and the screen
displays "12H"
7. Press or key to select
either "12H" or "24H" format.
8. Press key to confirm. A
sound of "di du" indicates
success. Screen displays
"TIME FORM" again.
9. Press key to exit to off-line
mode.
56. DATE & TIME SETTING
If you subscribe to Caller ID (CID)
service from your local phone
company, the date and time
information within the CID data
will update this automatically.
Otherwise, user must set time in
"24" hour format mode and then
change to the 12 hour format
later for the proper display of AM
or PM. (Note: "PM" indication
can not be set in the 12 hour
28
mode.)
1. While off-line, press key
and it displays "CALL LOG".
2. Press or key to scroll to
"HS SETTINGS"
3. Press key for confirmation
4. Press or key to scroll to
"TIME FORM" and press
for confirmation.
5. Press key to see "24 H"
and then press to
select.
6. Press key to see "TIME
SET"
7. Use the number keys to input
new time in 24 hour format
(HH / MM),
8. Press key for confirmation.
A sound of "di du" indicating
successfully setting. The
screen displays "SET TIME"
again.
9. Press or key to scroll to
"SET DATE" and press
confirmation.
10. Use the number keys to input
new date in (MM / DD / YYYY)
format,
11. Press key for confirmation.
A sound of "di du" indicating
successfully setting. The
screen displays "SET DATE"
again.
12. Press key to quit and go
back to standby mode
57. RESTORE HANDSET DEFAULT
SETTINGS
Note: This setting restores
handset factory default settings.
All custom settings will be lost.
All phone book entries are not
affected.
1. While off-line, press
and screen displays "CALL
LOG".
2. Press or
"HS SETTINGS".
3. Press key to confirm.
4. Press or
"HS DEFAULT".
5. Press key for confirmation
and it displays "PIN ?".
6. Input PIN number xxxx
(factory default PIN = "0000").
7. Press key for confirmation.
A sound of "di du" indicates
success.
8. Press key to quit and
return to standby mode.
Please allow 10 seconds for
for the handset to re-establish
handshaking with base.
58. RESTORE BASE DEFAULT
SETTING
Note: This setting restores base
factory default settings. All
custom settings will be lost.
All messages and time will be
affected.
1. While off-line, press
and screen displays "CALL
LOG".
2. Pressorto scroll to "BS
SETTINGS".
3. Press
4. Press
"BS DEFAULT".
5. Press
and it displays "PIN ?". Input
key PIN number xxxx (factory
default PIN = "0000").
6. Press
to scroll to a sound of "di du" indicates
success. However, a sound
of "di" indicates the wrong
key to scroll to PIN input. Re-enter again.
7. Press
return to standby mode.
Please allow 10 seconds for
the handset to re-establish
handshaking with the base.
59. CALL LOG REVIEW (RECEIVED
CALLS)
1. Press
and it displays "CALL LOG".
2. Press
"RECEIVED".
3. Press
the latest group of incoming
calls.
4. Press
the number for call back or to
save.
(Note: Press the
off-line mode is a short-cut to the
incoming call List.)
key
60. CALL BACK TO AN INCOMING
CALLER
1. After reviewing the incoming
English
key to confirm.
or key to scroll to
key for confirmation
key for confirmation;
key to quit and
key while off-line
key and it displays
key and it displays
or key to scroll to
key while in