Optika Italy B-380 Serie Manuel D'utilisation page 8

• The microscope
condensers: one for brightfield and one for
darkfield. Select the suitable condenser for
the observation mode desired.
5. Lower the condenser holder using the height
condenser knob ①. (Fig. 5)
6. Insert the condenser round dovetail in the
condenser holder. (Fig. 6)
7. Tight the condenser locking screw ②. (Fig. 7)
8. (Only for darkfield condenser)
Connect the condenser jack to the connector on
the right side of the frame. (Fig. 8)
• When the condenser plug is connected, the
light coming from the microscope LED goes
out and the internal condenser LED turns on.
is delivered with two
BF
②
Page 8
Fig. 5
DF
Fig. 6
Fig. 7
Fig. 8