Technogym Group Cycle Manuel De L'utilisateur page 6

Personal data settings and chest belt tuning
The product comes with the following default settings when purchased:
- age (AGE): 30 years
- weight (KG / LBS): 70 kg (154 lbs)
- ambient heart rate (AHR): 70 bpm
These settings are required to calculate the calories burned and the target heart rate.
If the user does not enter his/her personal data, the kilocalories burned and target heart rate are calculated on the
basis of the default settings.
To enter personal data and tune the chest belt, press any key to switch on the display, then press and hold the
RETURN key.
Press the INCREASE key to increase the figure by one; keep the INCREASE key depressed to scroll the digits.
Press the DECREASE key to decrease the figure by one; keep the DECREASE key depressed to scroll the digits.
Press the RETURN key to skip to the next parameter.
After entering the ambient heart rate (AHR), tune the chest belt to the receiver:
- Wet the sensor area and put on the chest belt.
- Move to within at least 15 cm from the receiver area, marked by the symbol on the display.
- Wait for the chest belt code to appear.
If the chest belt is an ANT+ digital type belt, the code is alphanumeric; if a different type of chest belt is used, 4 zero
digits (0000) will appear.
Once the transmitter and receiver are tuned, the heart rate reading will appear in the middle frame of the display.
If tuning is not successfully completed within 20 seconds, or if the heart rate reading is incorrect, move closer towards
the receiver zone and press the PLAY key to restart the procedure.
Press the RETURN key to exit the settings and tuning menu.
The personal data entered may be modified even during the exercise or pause.
The chest belt must be tuned prior to starting the exercise and must be retuned before every new exercise.
If the display turns off automatically (after 5 consecutive minutes without any movement), the personal data stay
memorised. On the other hand, the default settings are restored if the display is switched off using the PLAY key.
Warning
It is advisable to use ANT+ type chest belts.
An analogue chest belt may be subject to interferences
from nearby users.
If using analogue chest belts, the equipment must be placed
at least 170 cm from each other as shown in the picture, in
order to avoid interferences.
170 cm
170 cm
170 cm
6
Wireless Console
0sm00698AA_GroupCycle Wireless Console_12gen.indd 6 12/01/2011 14.47.22