Presets - Lorex LNZ32P12 12X Manuel D'instruction

6
Controlling the PTZ Camera with an NVR
Advanced PTZ controls overview:
1. No.: Select the number of the action you want to perform.
2. Not supported.
3. PTZ camera menu: Click to open the camera's OSD menu. This menu is
for advanced users only. For full instructions on using the OSD menu, visit
www.lorextechnology.com
4. Preset: Click to call the selected preset.
5. Autopan: Click to start autopan. During autopan, the camera will continu-
ously pan 360°.
6. Tour: Click to run the selected tour.
7. Flip: Click to flip the camera 180°.
8. Pattern: Click to run the selected pattern.
9. Reset: Click to move the camera to the home position.
10. Auto scan: Click to run the selected autoscan.
11. Aux: Click to open the aux menu, where you can set up Presets, Tours,
Patterns, and Auto Scans.

6.2.1 Presets

Presets will save a camera position for quick retrieval.
To add presets:
1. Click
#LX400020; r. 1.0/16372/16530; en-US
to download the LNZ32P12 OSD Menu manual.
to open the aux menu.
1
5
7
9
4
6
8
10
2
3
11
20