Lorex LNZ32P12 12X Manuel D'instruction page 20

5
Installation
4. Remove the foam ring* around the camera module.
5. Connect the camera to the cabling in the ceiling. See 4 Connecting the
Camera, page 5 for full connection instructions.
6. Push one of the included O-rings (x4) onto each of the included mounting
screws (x4). Attach the PTZ camera firmly to the ceiling using the included
mounting screws until the O-rings are flush against the camera base. Use
the included anchors if needed.
#LX400020; r. 1.0/16372/16530; en-US
16