Lorex LNZ32P12 12X Manuel D'instruction page 17

5
Installation
7. Pull the camera cables through the hole in the pendant cap. Use the in-
cluded Allen bolts (x4) to attach the PTZ camera base firmly to the pend-
ant cap. Tighten using the included Allen key.
8. Re-attach the dome cover, ensuring that the rubber O-ring around the
camera base is in place and the alignment arrow* on the dome cover lines
up with the camera base.
9. Tighten the dome cover screws (x3) using the included Allen key.
#LX400020; r. 1.0/16372/16530; en-US
13