System Settings; Interchangeable Reagents Unit - SI Analytics TITRONIC 500 Mode D'emploi

5

System Settings

Fig. 71
From the main menu (Fig. 71), <SYS>/<F7> or the <MODE> front keys, followed by <System settings> you get
to the system settings:
Fig. 72
Setting the national language was already described in Chapter 2.5.

5.1 Interchangeable Reagents Unit

Each interchangeable unit is equipped with an RFID transponder. This transponder can be used to store the
following information:
• Unit size: (the default setting, cannot be changed)
• Unit ID: (default setting, cannot be changed)
• Reagent name: (default: blank)
• Concentration: (default: 1.000000)
• Concentration determined on: (Date)
• To be used until: (Date)
• Opened/Produced on: (Date)
• Test according to ISO 8655: (Date)
• Charge description: (default: no charge)
• Last modification: (Date)
Chapter 5 - System Settings
95