Change Method Parameters; Method Type; Result - SI Analytics TITRONIC 500 Mode D'emploi

4.5 Change Method Parameters

The input or modification of the method name was already described in Chapters 4.1 and 4.3.
Fig. 53
4.5.1

Method type

On the <Method type> you can select whether you wish to perform a manual titration or a dosage or whether you
wish to prepare a solution (Fig. 54).
Fig. 54
The selection of the Method type will have an influence of the further parameterisation of the method. For
instance, if you select the dosing mode, no selection of a formula will be available.
4.5.2

Result

The <Result> menu offers the following possible settings:
Fig. 55
The Result text may contain up to 21 alphanumeric characters including special characters.
Chapter 4 Method Parameters
87