Initial Filling Or Rinsing Of The Entire Interchangeable Unit - SI Analytics TITRONIC 500 Mode D'emploi

Chapter 2 - Unpacking and first Operation
71
Fig. 15

2.8 Initial Filling or Rinsing of the Entire Interchangeable Unit

Initial filling of the interchangeable unit is done using the <rinsing > rinsing programme. On the main menu (fig.
16),
Fig. 16
press <MODE> key to navigate to the methods/system (fig. 17).
Fig. 17
Pressing <↑> once will take you to the <Rinsing> selection immediately (fig. 18).