Menu Structure - SI Analytics TITRONIC 500 Mode D'emploi

3.5 Menu Structure

There are 4 selection menus:
• Start or main menu
• Method parameters,
• Method selection
• System settings
After power-up, the main menu is always the first menu to appear. The method displayed will always be the last
method that was used (Fig. 24).
Fig. 24
Pressing <START> will result in the immediate execution of the method shown. <EDIT>/F3 will take you to the
method parameters (Fig. 25).
Fig. 25
At this point you can
• modify the current method
• create a new method
• call and memorise standard methods
• copy or delete an existing method
Use the <↓> und <↑> keys to select the submenus, confirm your selection with <OK>/<ENTER>. <ESC> will take
you back to the main menu.
Chapter 3 – Working with the burette TITRONIC
®
500
77