Astralpool ELYO SMART NN 06 Manuel D'installation Et D'utilisation page 38

7. Start-up of the Heat Pump
7.2.4 System reset function
Press and in 10s, the system will reset and display "0000" on the controller.
7.2.5
Symbol of heating, the light will be on when it is in operation.
When defrosting, the light will flash.
7.2.6
Symbol of cooling, the light will be on when it is in operation.
7.2.7
Symbol of automatic stop, the light will be on when it is in operation.
7.2.8
Symbol of automatic start, the light will be on when it is in operation.
7.2.9
Press this button, the light will be flash, the heat pump will operate in 'Full output' only.
7.2.10
While you choose the Smart, the heat pump will just operate in 'Medium output' and 'Full output'
When in 'Medium output', the light of Smart will flash.
When in 'Full output', the lamp of Smart is lighting, the lamp of Powerful will be flash.
7.2.11
While you choose the Silent, the heat pump will just operate in 'Medium output' and 'Small output'
When in 'Small output', the light of Silent will flash.
When in 'Medium output', the lamp of Silent is lighting, the lamp of Smart will be flash.
- 34 -