Astralpool ELYO SMART NN 06 Manuel D'installation Et D'utilisation page 37

Press
first, then press
Code Name
P0 Mandatory defrosting
P1 Working mode
P2 Timer on/off
P3 Water pump
P4 Current time
P5 Timer on
P6 Timer off
P7 Water temp. calibration
P12 MOBUS COM
P13 MODBUS ID Address
Code with connect
68769
68770
68771
68772
68774
68775
68776
68850
68851
Product code parameter P (Modbus Only): Press
or to choose the target number from 0-F, then press
third and forth number. Lastly press
After the setting, the product code parameter P couldn't be reset, even if system reset,Its setting value is always
retained.
7. Start-up of the Heat Pump
to check/adjust the User parameter from P1 to P7
Scope Default
0-1 0
0-1 1
0-1 0
0-1 0
HH:MM 00：00
HH:MM 00：00
HH:MM 00：00
-9～9 0
0 - 5 0
1 - 88 9
Parameter P
0CA1
0CA2
0CA3
0CA4
0CA6
0CA7
0CA8
0CF2
0CF3
to save the setting and exit, or it automatically exit after 15 seconds.
0: Default normal operation
1: mandatory defrosting.
1:Heating mode, 0:cooling mode,
1 Timer on/off is under function， 0 Timer on/off is out
of function (The setting of P5 and P6 won't work)
1:Always running;
0:Depends on the running of compressor
0-23:0-59
0-23:0-59
0-23:0-59
Default setting: 0
Modbus Only（default value after reset）
Modbus Only（default value after reset）
ELYO SMART NN 6.1-2.1
ELYO SMART NN 9.2-2.3
ELYO SMART NN 12.5-2.9
ELYO SMART NN 16-3.8
ELYO SMART NN 19-4.7
ELYO SMART NN 24-5.9
ELYO SMART NN 24-5.9 T
ELYO SMART NN 28.5-6.8
ELYO SMART NN 28.5-6.8 T
+ for 5 second, the first digital number flashes, press
go to adjust the second number. So does the
- 33 -
Remark
Description