Scrubbing Wheels; Grinding With A Wire Brush; Cutting Disc; Assembly - Deltafox DP-EAG 7525 Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 57

Scrubbing wheels

Never use a cutting wheel for
scrubbing !
The device must only be oper-
ated with the protective hood
mounted when the rough grind-
ing wheel is used.
Exert only moderate pressure on the
workpiece. Move the device evenly back
and forth.
A working angle of 30° to 40° achieves the
best results for scrub grinding.

Grinding with a wire brush

Ensure that you observe the per-
missible speed when selecting
the wire brush. The permissible
rotation speed of the wire brush
must be at least as high as the
highest rotation speed indicated
on the angle grinder.
Wear protective goggles: wires
may become released!
Suitable for rough rust removal, cleaning
weld seams and removing paint.
Press the wire brush with medium force
onto the workpiece to be processed.
Do not exert excessive strain on the wire
brush by pressing down too hard.

Cutting disc

Never use a scrubbing wheel for
cutting !
The device must only be oper-
ated with the protective hood
mounted when the cutting disc
is used.
Only certified, fibre-reinforced cutting or
grinding discs may be used.
In general, work with small scrubs. Exert
only moderate pressure on the workpiece.
Always work in the counter-direction. This
ensures that the device is not pushed out
of the cut through lack of control.

Assembly

Caution! Risk of injury!
- Ensure that you have sufficient
space in which to work, and that
you do not endanger other peo-
ple.
- All hoods and protective devices
must be assembled properly
before commissioning.
- Disconnect the mains plug be-
fore changing the setting on the
device

Mount handgrip

The device must only be oper-
ated with the handgrip mounted.
Depending on the method of working,
tighten the handgrip (
handgrip thread (
(see illustration
Assemble/set protective
hood
Adjust the protective hood such that any
sparks or detached parts cannot hit either
the user or any bystanders.
GB
5) on to the
2) on the left, right
) or top of the device.
33

Publicité

Table des Matières
loading

Table des Matières