Notes On Safety; Symbols - Deltafox DP - CJS 2025 Traduction De La Notice D'utilisation Originale

GB
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool
is turned off and times when the
tool is turned on but is running
idle).

Notes on Safety

This section details the basic safety in-
structions for working with the appliance.

Symbols

Symbols on the Equipment
Caution!
Read through the instruction man-
ual carefully.
22
Wear eye protection.
Wear ear protection.
Wear breathing protection.
Wear cut-resistant gloves.
Keep other people away from the
device.
Keep hands away from the sawing
area.
Always remove the rechargeable
battery before carrying out work
on the device. Risk of injury!
Electrical appliances must not be
disposed of with the domestic waste.
The device is suitable for indoor use
only
Caution! - Laser radiation.
Do not look into the beam.
Laser class 2
Symbols in the manual
Warning symbols with informa-
tion on damage and injury pre-
vention.