CERTIFIED 060-1310-2 Guide D'utilisation page 27

26
model no. 060-1310-2 I contact us: 1-844-428-7277
Installing Drive Belt
See Fig. 29.
1. Install new belt around engine sheave and align
with drive and idler sheaves.
2. Reinstall extension spring onto idler arm.
IMPORTANT: Ensure belt has tension and
is aligned in all sheaves.
3. Reinstall belt cover and secure with original
hardware.
4. Reconnect spark plug wire.
REPLACING SCRAPER BLADE
Replace scraper blade if damaged, completely worn
through, or with every paddle replacement.
Removing Scraper Blade
1. Stop engine and wait for all moving parts to stop
and for hot parts to cool.
2. Tip unit back onto handlebar bend.
(Fig. 23)
NOTICE: DO NOT tip beyond bend or oil
may leak from engine.
See Fig. 30.
3. Disconnect spring hooks from scraper blade,
remove from unit and discard.
4. Using a wrench, hold pivot rod stationary and
remove hardware retaining pivot rod and blade.
Retain hardware.
5. Remove pivot rod from scraper blade and discard
blade(Fig. 31).
Installing Scraper Blade
1. Insert pivot rod through new scraper blade.
IMPORTANT: Reinstall pivot rod so
wrench flats are positioned toward the
right side of unit (Fig 32).
Fig. 29
Fig. 30
Fig. 31
Fig. 32