Marvel MP36BF2 Mode D'emploi page 7

Réfrigérateur/ congélateur encastré
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Settings and Functions
Entry Tone
The entry tone is the "beep" you will hear when you press the control pad. You can deactivate the entry tone by pressing
and holding the "ACTIVATE CONTROLS" pad for three to fi ve seconds. You will hear three short beeps to let you know
that the entry tone feature has been deactivated.
To activate the entry tone, simply press and hold the "ACTIVATE
CONTROLS" pad for three to fi ve seconds.
Fast Cool
Fast Cool runs the compressor at high speed for 2 hours to cool the refrigerator as quickly as possible. After 2 hours, the
refrigerator will return to the previous setting.
To activate fast cool, press "ACTIVATE CONTROLS" followed by the "FAST COOL" pad. The fast cool light will be lit.
Max Refrigerator Mode
Max refrigerator mode adjusts the refrigerator temperature to the coldest setting for four hours, at the end of which the
refrigerator's temperature automatically returns to its previous setting.
To activate the max refrigerator mode, simply press the "ACTIVATE CONTROLS" pad, followed by the "MAX REF" pad.
The "MAX REF" light will glow to let you know you've turned on the max refrigerator mode.
To deactivate the max refrigerator mode before the end of the four hour cycle, press the "ACTIVATE CONTROLS" pad,
followed by the "MAX REF" pad.
Max Freezer Mode
Max freezer mode adjusts the freezer temperature to the coldest setting for 6 hours, at the end of which, the freezer
temperature automatically returns to its previous setting.
To activate the max freezer mode, press the "ACTIVATE CONTROLS" pad, followed by the "MAX FRZ" pad. The
"MAX FRZ" light will glow to let you know you have turned on the max freezer mode.
To deactivate the max freezer mode before the end of the 6 hours cycle, simply press the "ACTIVATE CONTROLS" pad,
followed by the "MAX FRZ" pad.
Door Open Alarm
Door open alarm sounds and the "DOOR OPEN" light blinks if either door is left open for more than three minutes.
To deactivate the door open alarm, press the "ALARM OFF" pad or close the door that is open.
High Temperature Alarm
High temperature alarm sounds and the "HIGH TEMP" light glows if the refrigerator or the freezer temperature is too
high for two hours. A blinking light signals which part of the appliance is affected. The alarm sound will end when the
temperature is brought back to a proper setting.
To deactivate the high temperature alarm, press the "ALARM OFF" pad.
Power Loss Alarm
No alarm sounds, however, the "POWER" indicator fl ashes indicating a power loss. Press "ALARM OFF" to clear.
Temperature Sensor Alarm
Temperature sensor alarm is a special feature that electronically senses temperature sensor problems. The temperature
sensor alarm will sound and the display will show either oPn or Shr. The alarm can be deactivated by pressing the "Alarm
Off" pad on your refrigerator's control panel. If the display does not return to showing the temperature, contact an
authorized technician immediately.
7

Publicité

Table des Matières
loading

Table des Matières