Marvel MP36BF2 Mode D'emploi page 10

Refrigerator
Deli Drawers
To remove drawer, roll the drawer out to the stop. Then, on each side of the drawer,
locate the black lever on the glides and lift up until the drawer disengages from the
glides.
Pull the drawer out the rest of the way. To replace the drawer, extend the glides out
to the stop. Next, place the drawer onto the glides and push it back until the drawer
engages the hook. Lower the front part of the drawer, grasp the glides/drawer and
lightly squeeze until the drawer snaps onto the glides. Then slide the drawer back
until it stops.
Adjustable Humidity Zone™ Drawer(s)
The moisture control on your refrigerator produce drawer(s) gives you the ability to change the amount of moisture or
humidity in a drawer, and the clear top section allows you to see into a drawer without opening it.
The moisture control is located underneath the front trim. Slide the control to a higher setting for storing deli items
or produce with leaves, such as lettuce, spinach, or cabbage. Slide the control to a lower setting for storing fruits and
vegetables with skins, such as apples, corn, or tomatoes. See "Food Storage Guide" (pg. 12) for more information on storing
foods properly.
To remove drawer, roll the drawer out to the stop. Then, on each side of the drawer, locate the black lever on the glides and
lift up until the drawer disengages from the glides. Pull the drawer out the rest of the way.
To replace the drawer, extend the glides out to the stop. Next, place the drawer onto the glides and push it back until the
drawer engages the hook. Lower the front part of the drawer, grasp the glides/drawer and lightly squeeze until the drawer
snaps onto the glides. Then slide the drawer back until it stops.
10
Black
Lever