Sling Application - Etac Molift RgoSling Active Manuel D'utilisation

1. Ask the user to lean forward, support him if
necessary with one hand. Slide the sling down
behind the user's back. Place the sling approxi-
mately at waist height on the back.
2. Place the belt around the waist of the user,
connect the buckle and tighten the belt.
Choose the correct sling size. Max
10 cm gap between right and left
side of waist belt padding.

Sling application

3. Place the hoist in position for fastening the sling
to the suspension, and place the users feet on the
footplate.
4. Fasten the sling to all four suspension hooks.
Make sure the lifting straps are fastened with
equal length on both sides.
9
Molift RgoSling Active / www.etac.com