Sling Application - Etac Molift EvoSling FlexiStrap Manuel D'utilisation

Molift EvoSling / www.etac.com

Sling application

1. Use the application pocket on the sling for easier fitting.
2. Push the sling under the user so it is possible to pull out on the
opposite side.
3. Pull the sling and center it under users body part(s)
4. Make sure the lifting straps are fastened
with equal length on right and left side.
Alternative use
EvoSling FlexiStrap Standard can be used as an accessory for the
Etac Nova Stand Up.
Please read the user manual for Etac Nova
Stand Up Sling and Nova 500NG before use!
It is important to fully understand the con-
tents of the user manual before attempting
to use the equipment.
Transfer
When repositioning the user, stand to their side. Make sure that
arms and legs do not obstruct the seat, bed, etc. Make sure
the user has the mobility necessary for the intended hoisting
procedure.
Never lift the users body part higher than
necessary. Remember that wheels on a
mobile lift must NOT be locked.
1. Check that the sling is correctly fitted around the user and
that the strap loops are correctly fitted to the suspension
hooks.
2. Start lifting until the lifting straps are stretched without lift-
ing the users body part. Ensure that both loops of the sling
are securely fastened.
3. Lift the users body part.
6