Etac Molift RgoSling Active Manuel D'utilisation page 10

Molift RgoSling Active / www.etac.com
1. Check that the sling is correctly fitted around
the user and that the strap loops are correctly
fitted to the lifting arm hooks.
2. Make sure user has both feet placed on the
footplate on the lifter.
3. Stretch the sling straps without lifting the user.
Ensure that both loops of the sling are securely
fastened on all four hooks to avoid the user
slipping or falling.
4. Make sure the waist belt buckle is securely
locked.
5. Lift user to standing postition, and tighten and
adjust the sling if necessary.
The user should lean back slightly when lifting,
and if possible hold onto the handles. The waist
belt should be retightened when lifting begins
and when the sling is loaded. The user should not
stand fully upright during the transfer because this
could be uncomfortable.
Transfer
Never leave a user unattended in a
lifting situation.
Be careful during movement, the user may swing
during turns, stops and starts. Be careful when
manoeuvring close to furniture to prevent the
suspended user from colliding with these objects.
The hoist shall not be used to lift or
move users on sloping surfaces
Avoid deep pile carpets, high thresholds, uneven
surfaces or other obstacles that may block the
castors. The hoist may become unstable if forced
over such obstacles increasing the risk of tipping
over.
10