230V Output (J9); 24Vdc Output (J10); Maintenance; Waste Management - S&P CONTROL ECOWATT BASIC Mode D'emploi

4.3. 230V OUTPUT (J9)

230V50H output controlled by manual side switch specially designed to
power ECOWATT fans with ECtechnology motor.

4.4. +24VDC OUTPUT (J10)

Available to supply a presence detector, timer or sensor with free voltage
output to be combined with any digital input INPUT1, INPUT2 or INPUT3.

5. MAINTENANCE

Before manipulating the fan, make sure it is disconnected from the mains
supply even if it has previously been switched off.
Prevent the possibility of anyone else connecting it while it is being ma-
nipulated.
Fan unit must be regularly inspected. These inspections should be carried
out bearing in mind the machine's working conditions, in order to avoid
dirt or dust accumulating that could be dangerous and perceptibly shorten
the life expectancy.
All maintenance and repair work should be carried out in strict compliance
with each country's current safety regulations.

6. WASTE MANAGEMENT

EEC standard, together with the responsibility we should assume with fu-
ture generations in mind, oblige us to recycle all the materials we can.
Therefore, please deposit all left-over material and packaging in their co-
rresponding recycling containers and hand in the replaced machines to the
nearest handler of this type of waste product.
17