General; Warnings; Safety Regulations And "Ce" Marking - S&P CONTROL ECOWATT BASIC Mode D'emploi

1. GENERAL

Thank you for purchasing this appliance. It has been manufactured in full
compliance with applicable safety regulations and EU standards.
Please read this instruction book carefully, as it contains important in-
formation for your safety during the installation, use and maintenance if
this product. Keep it at hand for future reference. Please check that the
appliance is in perfect condition when you unpack it, as all factory defects
are covered by the S&P guarantee.

1.1. WARNINGS

This manual contains all the information for all exposed, in order to pre-
vent possible damage to people and / or things, because of a defective
handling or maintenance. All maintenance interventions (ordinary and
extraordinary) must be carried out with the device off and disconnected
power supply. Before supplying power to the terminal, check that the line
voltage corresponds to that indicated on the nameplate of the unit.

1.2. SAFETY REGULATIONS AND "CE" MARKING

S&P technicians are fi rmly committed to research and development of ever
more effi cient products and in compliance with current safety regulations.
The instructions and recommendations given below refl ect current regu-
lations, principally regarding safety, and therefore are based on complian-
ce with general regulations. Therefore, we recommend all people exposed
to hazards to strictly follow the safety regulations in force in your country.
S&P will not be held liable for any possible harm or damage caused by non
compliance with the safety regulations, as well as caused by modifying
the product.
The CE mark and the corresponding declaration of conformity are proof of
the product's conformity with current EU regulations.
12