Leds Indicators (D9-D12) - S&P CONTROL ECOWATT BASIC Mode D'emploi

Modo 2: Hasta tres velocidades
Digital inputs
INPUT1: Speed 1 activation (Closed contact = ON / Opened contact = OFF)
INPUT2: Speed 2 activation (Closed contact = ON / Opened contact = OFF)
INPUT3: Speed 3 activation (Closed contact = ON / Opened contact = OFF)
Speed settings
Three available speeds are adjusted by each potentiometer.
INPUT1 / Speed 1: Potentiometer R12 0-100%/0-10V
INPUT2 / Speed 2: Potentiometer R15 0-100%/0-10V
INPUT3 / Speed 3: Potentiometer R20 0-100%/0-10V
Output signal OUT1
Output signal always take the worst between adjustments for INPUT1,
INPUT2 and INPUT3 values.

4.2. LEDS INDICATORS (D9-D12)

Logic followed in LED lighting:
Status
Off
Blinking
On
Leds identifi cation:
Led
D12
D11
D10
D09
16
Description
Digital input / Output signal inactive
Digital input active but potentiometer set in 0%
Digital input / Output signal active
Digital input / Output signal
Output signal (0-10V)
Digital input INPUT1
Digital input INPUT2
Digital input INPUT3