Placing The Antenna Dish - Travel Vision R6 Manuel De L'utilisateur

3.3

Placing the antenna dish

How to mount the antenna dish on the tripod: How to mount the antenna dish on the tripod:
Guide the rotation axle of the antenna dish in
socket of the tripod
Then slowly rotate the dish in either direction until the axle Then slowly rotate the dish in either direction until the axle
has been fixed in the tripod.
Lower the LNB all the way down.
Ensure that the arm locates into its hinge ensuring
LNB is properly aligned with the antenna dish.
"click"
Before using the system, connect the cable with the F- Before using the system, connect the cable with the F
connector to the LNB and hand-tighten it
required.
of the antenna dish into the plastic
that the arm locates into its hinge ensuring that the
the antenna dish.
tighten it. No tools are
page 7