Safety Instructions And Warnings; Tips Before Going On Vacation; Travel Vision R6 ® Packaging; Shipment Check List Travel Vision R6 - Travel Vision R6 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1.1

Safety instructions and warnings

Carefully read this user manual before using the device.
Scope of use
Your Travel Vision R6 ® has been developed to automatically search and find a satellite signal. This device is
only intended for use by consumers and outdoors
For safe use, please observe the following:
Tripod
When extending or folding up the tripod, be careful not to pinch your hands between the legs of the tripod.
Handling the dish unit
Use the hand grip on the back of the dish unit when picking up the system for positioning or storage.
LNB arm
When folding down the LNB arm, ensure that your fingers do not become pinched in the hinge.
During alignment
Make sure not come into physical contact with the dish unit while it is aligning and rotating. Only use the control
module and make sure nothing and nobody enters the turning circle of the system during its alignment.
Connecting the system
Always first fully connect the system before switching on the power supply. Otherwise you risk receiving a slight
electric shock.
Coaxial cable
Ensure that when unrolling the system's coaxial cable, it is laid down as flat as possible and that it is covered so it
does not pose a tripping hazard.
1.2

Tips before going on vacation

Check whether your subscription or smart cart is still valid.
Check the correct function of the system.
Check the website
1.3
Travel Vision R6 ® packaging
The Travel Vision R6 ® is packed in a cardboard box with the dimensions of 66x38x83 cm which is
protected on both sides with EPS foam.
Before opening the package we kindly request that you check the following:
The cardboard box may not be deformed and may not have serious and obvious signs of damage such
as cracks in the cardboard or dents resulting from impact.
The sealing tape on the package must be intact.
1.4
Shipment check list Travel Vision R6 ®
The following parts should be included in the shipment:
Antenna dish (complete antenna unit with LNB)
Control module (display, holder with electronics and motors)
Tripod
15 meters of coaxial cable with waterproof connectors
230-240V power adapter
Power inserter
20 cm coaxial cable (for the connection on the power inserter to the receiver)
User manual
www.travel-vision.com
or ask your dealer for any software updates.
Page
4

Publicité

Table des Matières
loading

Produits Connexes pour Travel Vision R6

Table des Matières