Black+Decker POWERSERIES PRO HCUA525J Mode D'emploi page 8

Aspirateur 2 dans 1 sans fil au lithium-ion
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
State of charge indicator
Allows you to monitor the level of power being used.
BATTERYSENSOR Indicator
The LED battery indicator displays the remaining charge and warns you
when the battery is low. The final LED will flash continuously when
there is only 1 minute of runtime remaining. All LEDs will flash when
the unit is discharged.
FILTERSENSOR
Smart sensor technology automatically detects (the symbol will light
red) when the filter becomes clogged and needs to be cleaned.
Fig. H
35
Adjustable suction force (Fig. I)
The appliance has an adjustable suction slider
vacuum can be adjusted to operate at a lower suction level
to extend run time or higher suction level to pick up debris
that requires more power.
To increase suction slide your finger on the adjustable
suction slider
37
to the right as shown in Figure I.
Corresponding LEDs on the min/max indicator will
display the selected suction force.
To decrease suction slide your finger on the adjustable
suction slider
to the left.
37
Fig. I
6
Powered rotary brush and LED (Fig. J, Z)
To engage the rotary brush
head 
 7 
as shown in Figure J. When the rotary brush is ON the
LED work light will illuminate to better see debris as
you vacuum.
To disengage the rotary brush
brush ON/OFF button 
Fig. J
Removing and attaching the lift away
canister (Fig. K, L)
To remove the lift away canister from the chassis,
press the lift away canister release button 
the lift away canister 
away handle 
shown in Figure K.
Release the hose connector 
port 
6
To attach the lift away canister to the chassis, hold
the main lift off handle 
canister 
canister locks into position as shown in Figure K.
Connect the hose connector 
port 
 6
37
. The
Fig. K
5
37
(Fig. Z) inside the floor
39
, depress the rotary brush ON/OFF button
39
, depress the rotary
a second time.
38
5
from the chassis 
36
and lift out the lift away canister 
from the chassis hose
3
as shown in Figure L.
36
and place the lift away
 5
onto the chassis and slide downward so the
to the chassis hose
3
as shown in Figure L.
36
41
38
38
41
to release
23
hold the lift
5
as
23

Publicité

Table des Matières
loading

Table des Matières