Lanaform Fidji Mode D'emploi page 7

2 Cleaning the reservoir
3 Changing the water in the
4 Cleaning the device and making
To clean the transducer:
1 Put 2 to 5 drops of vinegar
2 Brush the foam off the surface
3 Rinse the reservoir of the
4 Do not use soap, solvent or spray
To clean the reservoir:
1 Clean the reservoir with
2 Rinse the reservoir in clean water.
Storage
Having cleaned and dried the device,
store it in a dry, cool place out of the
reach of children.
BREAKDOWNS AND
SOLUTIONS
In the event of a malfunction, under
normal conditions of use, please refer
to the following chart:
E-IM-Fidji-001-2.0.indd 7
every 2 days and cleaning
the transducer every week,
reservoir every 2 days,
sure that all its parts are comple-
tely dry when it is not in use.
on its surface and leave them
there for 2 to 5 minutes.
with a soft brush (Fig. 7,
point 1). Do not use a hard
tool to scrape the surface.
base in clean water.
cleaner to clean the transducer.
water using a soft cloth and
vinegar if there are any foam
or limescale deposits on the
inside (Fig. 7, point 2).
EN
FR NL DE IT PL CS SK SL HR LT
sentimen No steam, no light indicators
help_out If there is no light.
sentimen Check the mode chosen. If you
chose continuous diffusion
with ambient light, check that
the device is plugged in and no
power outage has occurred.
help_out The water level in the
reservoir is too low.
sentimen Add water to the reservoir.
help_out The temperature of
the unit is too low.
sentimen Place the unit in a room at
ambient temperature for
half an hour prior to use.
help_out The mist outlet is blocked.
sentimen Clean the mist outlet to
maintain ventilation.
sentimen Mist has an unusual smell
help_out The water has been standing
in the reservoir for too long.
sentimen Clean the reservoir and
pour fresh water into it.
sentimen Low intensity
help_out Too much/too little water
in the reservoir.
sentimen Empty water out of the
reservoir or add water to it.
help_out Sediment on the transducer.
sentimen Clean the transducer.
help_out The water is too cold.
sentimen Use water that is at
room temperature.
help_out The water is not clean.
sentimen Clean the reservoir and
pour fresh water into it.
7
/ 60
23/05/2018 11:45:27