TEX-265 Booklet v4.qxd
PROBLEM
1. Coffee does not flow
2. Coffee is too weak or
flows too quickly
3. Coffee flows to slowly or
is too strong
4. Coffee flows from the edge
of the Filter Holder
5. No steam from
the Steam Tube
6. Steam escapes from
the Boiler Cap area
3/02/05
10:10
Page 23
TROUBLESHOOTING
SOLUTION
• Remember to fill the Boiler with water
• Check if Control Knob has been moved
to 'cup symbol'
• Use a coarser grind of coffee
• Reduce the amount of coffee in the Filter
• Do not compact coffee in the Filter
• Use a finer grind of coffee
• Increase the amount of coffee in the Filter
• Use coarser grind
• Reduce the amount of coffee in the Filter
• Follow the Descaling instructions in
this booklet.
• Wipe excess grinds from edge of
the Filter Holder
• Make sure the Filter Holder
is installed securely.
• Gasket needs to be cleaned or replaced.
• Remember to fill the Boiler
• Check if the Control Knob is in the
'steam cloud' position
• When the machine is cold, unblock the
Steam Nozzle (See Care and Cleaning #3)
Then try again.
• This is the normal function of the
pressure regulating process
10