Arc Software Installation - Paradigm PERSONA SUB Guide De L'utilisateur

ANTHEM ® ROOM CORRECTION (ARC
• Your ARC microphone and its calibration file work
together as a pair. Before the microphone can be used
by the ARC software, its exact response must be known.
So each ARC microphone's frequency response is
precisely measured at the factory to create its unique
calibration file. Download your microphone's unique
calibration file from anthemav.com/arc.
• Your computer must running Windows 7 or later. If
you're using a laptop computer, check its power settings
and battery meter to ensure that ARC procedures will
not be interrupted.
• The ARC acoustic measurement process rejects typical
background noise, but if loud noise is present it may
interfere with the ARC process. ARC may indicate that
re-measurement is required. To avoid this, ensure that
the room being tested will be sufficiently quiet during
measurement.
™ )
(continued)

ARC SOFTWARE INSTALLATION

• Download the latest software version to your computer
desktop at anthemav.com/arc.
• Right-click on the downloaded .zip file folder and extract
to desktop.
• Open the extracted folder and double-click on "Setup."
• Software installation instructions will appear on
your screen.
• Go to Start Menu and "run" ARC.
If you are downloading an ARC update, make sure the
existing ARC program is closed on your computer before
installing a new version.
10