Testing Procedure - Paradigm PERSONA SUB Guide De L'utilisateur

ANTHEM ROOM CORRECTION (ARC
®

TESTING PROCEDURE

We recommend you measure audio response at a
minimum of FIVE listening positions. Up to TEN positions
can be tested with ARC if your room is unusually large
(more than 40' x 40') or unusually shaped—more is not
necessarily better.
POSITION ONE: This "main measurement position" should
be located at or just in front of the central seating position
(the "Sweet Spot"). This is the "main measurement
position" that is used to set the bass volume levels.
ADDITIONAL POSITIONS: All additional measurement
positions should be symmetrically spaced a minimum of 2
feet from position one* (see Diagram A) .
NOTE: If your "main measurement position" is against a
wall, additional measurement positions should be in front
of the seating area. Vary the distance of these positions
relative to the wall by 1 foot or more from each other so
they are not all the same distance from the wall .
(see Diagram B) .
™ )
(continued)
Diagram A
Diagram B
12