Vileda ESW2 Manuel D'utilisation page 36

GB
Before you start: Your Electric Broom + Dustmop will require very little assembly. Remove every-
thing from the carton and familiarize yourself with all the components. This will help you in the
assembly and operation of your Electric Broom + Dustmop.
1. Unpack and remove all product parts from the packaging. Remove the cardboard from the on/off Switch.
2. Fit the Lower Handle Tube into the Main Unit. Ensure the correct tube is at the bottom.
3. Connect the Lower Handle Tube to the Upper Handle Tubes. Push the Handle Tubes & the
Upper Grip firmly together.
4. Connect the dustmop with the detachable cloth to the back of the unit. The unit can be used
with or without the dustmop.
36
Assembly