Powermate PWFC132600 Guide D'utilisation page 3

IMPORTANT SAFETY INFORMATION (CONT.)
• SAVE ALL INSTRUCTIONS
RISK OF EXPLOSION FOR FIRE (CONT.)
D A N G E R
WHAT CAN HAPPEN
• Improperly stored fuel could lead to accidental ignition. Fuel improperly
secured could get into the hands of children or other unqualifi ed persons.
• Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind
of fl ammable solvent with this product could result in serious injury or death.
RISK TO BREATHING (ASPHYXIATION)
D A N G E R
WHAT CAN HAPPEN
• Breathing exhaust fumes will cause serious injury or death! Engine exhaust
contains carbon monoxide, an odorless and deadly gas.
• Some cleaning fl uids contain substances which could cause injury to skin,
eyes or lungs.
RISK OF FLUID INJECTION AND LACERATION
D A N G E R
WHAT CAN HAPPEN
• Your pressure washer operates at fl uid pressures and velocities high
enough to penetrate human and animal fl esh, which could result in amputa-
tion or other serious injury. Leaks caused by loose fi ttings or worn or dam-
aged hoses can result in injection injuries. DO NOT TREAT FLUID INJEC-
TION AS A SIMPLE CUT! See a physician immediately!
• Injuries can result if system pressure is not reduced before attempting main-
tenance or disassembly.
RISK OF INJURY FROM SPRAY
D A N G E R
WHAT CAN HAPPEN
• High-velocity fl uid spray can cause objects to break, propelling particles at
high speed.
• Light or unsecured objects can become hazardous projectiles.
200-2835
• Store fuel in an OSHA-approved container, in a secure location away from
work area.
• Do not spray fl ammable liquids.
• Operate pressure washer in a well-ventilated area. Avoid enclosed areas such
as garages, basements, etc.
• Never operate unit in a location occupied by humans or animals.
• Use only cleaning fl uids specifi cally recommended for high-pressure wash-
ers. Follow manufacturers recommendations. Do not use chlorine bleach or any
other corrosive compound.
• Inspect the high-pressure hose regularly. Replace the hose regularly. Replace
the hose immediately if it is damaged, worn, has melted from contacting the en-
gine, or shows any signs of cracking, bubbles, pinholes, or other leakage. Never
grasp a high-pressure hose that is leaking or damaged.
• Never touch, grasp or attempt to cover a pinhole or similar water leak on the
high-pressure hose. The stream of water IS under high pressure and WILL
penetrate skin.
• Never place hands in front of nozzle.
• Direct spray away from self and others.
• Make sure hose and fi ttings are tightened and in good condition. Never hold onto the
hose or fi ttings during operation.
• Do not allow hose to contact muffl er.
• Never attach or remove wand or hose fi ttings while system is pressurized.
• To relieve system pressure, shut off engine, turn off water supply and pull gun
trigger until water stops fl owing.
•Use only hoses and accessories rated for pressure higher than your pressure
washer's PSI.
• Always wear ANSI-approved z87.1 safety glasses. Wear protective clothing to
protect against accidental spraying.
• Never point wand at or spray people or animals.
• Always secure trigger lock when wand is not in service to prevent accidental
operation.
• Never permanently secure trigger in pull-back (open) position.
3 - ENG
HOW TO PREVENT IT
HOW TO PREVENT IT
HOW TO PREVENT IT
HOW TO PREVENT IT
Copyright © 2011 MAT Industries, LLC