Function Test - afriso WaterSensor eco Mode D'emploi

7 Commissioning
7.1 Teaching in
 Verify that the product is in the vicinity of the AFRISOhome gateway.
 Verify that the AFRISOhome gateway is in "Learn" mode. See the operat-
ing instructions of the AFRISOhome gateway for information detailed
information.
 If you intend to mount multiple products, start by creating a mounting plan
with the appropriate mounting locations. Then label the products with
numbers or the corresponding mounting location to help avoid confusion
of mounting locations.
7.2

Function test

 Verify that the product is connected to the AFRISOhome gateway.
 Verify that the product is in the vicinity of the AFRISOhome gateway.
1. Press the piston at the product once and release it. The product sends two
signals to the AFRISOhome gateway: one signal, when the piston is
pressed down, one signal, when it is released.
2. Check whether the AFRISOhome gateway has received the signals.
Commissioning
1. Press the piston of the product
once.
- The product sends a Learn tele-
gram to the AFRISOhome gate-
way.
- The product is now connected to
the AFRISOhome gateway.
WaterSensor eco
EN
13