Metcal MFX-2200 Série Manuel D'utilisation Du Système page 7

Display Functions
(7) Actual Run Time
Particulate Filter Condition –
(8)
Bar Graph
(9) Quick View Button
ASD = Auto Shut-Down
All alarms are "visual". No acoustical alarms.
Setup of Parameters
Program Buttons:
(5) Setup
(1) Up
(9) Down
Steps
Enter Setup mode
Select parameter you
wish to change:
Description
Displays the accumulated operating
time. Can also be used as an alarm
when setting a specific run time in
Set-Up mode and turning the alarm
feature to ON.
Displays graphically the particulate
filter condition. If filter is in good
condition, the bar graph color is
green. The color changes with
increasing saturation to yellow and
then red.
Change filters when graph turns red.
Displays Settings for
o
Particulate filter condition Auto
Shut-Down
o
Temperature readings in C or F
and Auto Shut-Down
o
Time-to-Service Auto Shut-
Down
o
Run Time max. value and Auto
Shut-Down
1
9
Description
Parameters which can be
changed:
(3) % particulate filter
condition
(4) temperature
(6) time-to-service
(7) run time
7
2
3
8
7
Action
Press and hold down <Setup>
for 2 seconds.
Press <Setup> repeatedly until
desired parameter display
blinks.
Factory
Default
ASD =
OFF
Run time =
99999
N/A
N/A
4 5
6