Maintenance; Cleaning Instructions; Disposal; Limited Warranty - Dometic EZ-BREEZE Manuel D'installation Et D'utilisation

7 MAINTENANCE

Disconnect the positive (+) 12 VDC terminal from supply battery. Otherwise, damage to unit
could occur.

7 .1 Cleaning Instructions

5
To remove dust from the screens use a soft bristle brush and gently brush back and forth over the screen
➤
areas.
➤ For a more thorough cleaning, the center screen or Pop N' Lock screen on a Powered EZ-Breeze™
(model 600) can easily be removed by grasping the finger tab (FIG. 5) with one hand and pulling straight
down. Use your free hand to brace against the screen assembly. Once removed, this also provides access to
the fan blade for cleaning.
➤ To clean the fan blade simply wipe it down with a damp cloth.
➤ After cleaning the screen and fan blade, snap the Pop N' Lock screen back into place.
➤ (*Optional) To ease future cleanings: Once the screen and fan blade are clean and dry, you may wipe or spray
303 Protectant (a water-based protectant; do not use a petroleum-based protectant) on the screen and
blade and buff to a high gloss. This minimizes dust and dirt build-up and eases cleaning.

8 DISPOSAL

M Place the packaging material in the appropriate recycling waste bins, whenever possible. Consult a local
recycling center or specialist dealer for details about how to dispose of the product in accordance with all
applicable national and local regulations.

LIMITED WARRANTY

LIMITED WARRANTY AVAILABLE AT WWW.DOMETIC.COM/WARRANTY.
IF YOU HAVE QUESTIONS, OR TO OBTAIN A COPY OF THE LIMITED WARRANTY FREE OF CHARGE,
CONTACT:
DOMETIC CORPORATION
CUSTOMER SUPPORT CENTER
1120 NORTH MAIN STREET
ELKHART, INDIANA, USA 46514
1-800-544-4881 OPT 1
9
EZ-Breeze
EN