1
EXPLANATION OF SYMBOLS AND SAFETY INSTRUCTIONS
This manual has safety information and instructions to help you eliminate or reduce the risk of accidents
and injuries. The manufacturer accepts no liability for damage in the following cases:
• Faulty assembly or connection.
• Damage to the product resulting from mechanical influences and excess voltage.
• Alterations to the product without express permission from the manufacturer.
• Use for purposes other than those described in the operating manual.
1 .1 Recognize Safety Information
This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
1 .2 Understand Signal Words
A signal word will identify safety messages and property damage messages, and will indicate the degree or level
of hazard seriousness.
indicates a hazardous situation that, if not avoided, could result in death or serious injury.
indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
indicates information considered important, but not hazard-related, such as damage to
property.
I
indicates additional important information that is not related to property damage.
1 .3 Supplemental Directives
Read and follow all safety information and instructions to avoid possible injury or death.
Read and understand these instructions before installation, use and maintenance of this product.
Incorrect installation, operation, and maintenance of this product can lead to serious injury.
The installation must comply with all applicable local or national codes, including the latest edition of the
following standards:
U .S .A .
• ANSI/NFPA70, National Electrical Code (NEC)
• ANSI/NFPA 1192, Recreational Vehicles Code
1 .4 General Safety Messages
Do not operate fan without pop n' lock screen in place. Doing so could result in personal injury.
Failure to obey the following notices could result in property damage:
• Care must be taken to ensure proper alignment during installation.
• This product is for use with 12 VDC only.
• Connecting your fan to 110 V power will damage the fan motor and render it inoperable and may cause
property damage.
• Permanent magnet motors perform as designed on filtered DC current. Unfiltered DC current may create
irritating noise from the fan blade motors and may cause circuit boards to fail.
• This product is not suitable for use with solid-state speed controls.
• Do not leave vent flaps open and unattended for extended periods of time. High winds or other unusual
conditions may result in leakage and/or serious damage.
3
Canada
• CSA C22.1, Parts l & ll, Canadian Electrical Code
• CSA Z240 RV Series, Recreational Vehicles
EZ-Breeze
EN