SKYLOTEC MILAN AGR 2001 Instructions D'utilisation page 15

Milan 2.0
(Active)
1) Attach the rope
to the anchor point
(Passive)
1) Attach the device
to the Anchor point
5) Pull the rope down
and pull it into the rope
guide channel
MAT-BA-0068-03_20200129_in_Bearbeitung.indd 15 MAT-BA-0068-03_20200129_in_Bearbeitung.indd 15
2) Guide the Rope from
3) Pull the rope up
the orange cover plate
through the rope guide
over the rope hook into
channel
the rope guides channel
2) Pull the long end
3) Guide the Rope from the orange cover plate over
of the rope up
the rope hook
6) Pull the rope up into
7) Push the rope into
the rope clamp which
the rope clamp
is integrated in the
housing
4) Pull the rope down
and push it into the
rope clamp in the
housing
8) Guide the Rope over
the second rope hook
to secure the device,
ready to operate
15
29.01.2020 15:24:00 29.01.2020 15:24:00
GB