Technical Data; Guarantee Conditions - Dennerle Nano External SkimFilter Notice D'emploi

Table des Matières

Les langues disponibles

6.3

Cleaning the pump

• Unplug the filter from the mains and open it as described under point 6.2.

• Unscrew the two cross-recessed screws and carefully remove the cover of the pump. Carefully clean the impeller, axle and

pump housing. The impeller (art. no. 5605) and the axle (art. no. 5609) are available as spare parts.

• Reassemble the pump via the reverse procedure. Important: Do not overtighten the screws

7 Technical data

Mains voltage/mains frequency: 230 V / 50 Hz

Wattage:

Max. pump delivery rate:

Max. lifting height:

Mains lead:

IP 44

9 Guarantee conditions

Guarantee period: 24 months (excluding parts subject to wear)

When submitting guarantee claims, please send the equipment to Dennerle's Customer Service department together with the receipt providing proof of pur-

chase.

The guarantee covers manufacturing and material defects. Defective parts will be replaced or repaired free of charge during the guarantee period provided that

the product has been used in the correct manner and for the intended purpose.

During the guarantee period, the device may only be opened by Dennerle's Customer Service personnel, otherwise the guarantee coverage will lapse.

No claims shall be assertible beyond the value of the device, e.g. for damage to fish or plants.

We reserve the right to carry out technical modifications.

Sales / distribution: Dennerle GmbH, D-66957 Vinningen, Germany

Customer Service: DENNERLE GmbH, Industriestraße 4, D-66981 Münchweiler, Germany

www.dennerle.com

11,5 W

360 l/Std.

60 cm

1,40 m

8 Spare parts and accessories