Important Warning - Chicco Go-One Mode D'emploi

• WARNING! When adjusting the headrest or
backrest, ensure that movable parts of the
child car seat do not come into contact with
the child.
• When travelling, stop the vehicle in a safe
place before carrying out any adjustment op-
erations on the child car seat or on the child's
position.
• Check periodically that your child does not
unfasten the buckle of the safety harness, or
that it does not tamper with the child car seat
or any of its parts.
• Avoid giving food to your child while travel-
ling, in particular lollypops, ice lollies or other
foods on sticks: it may injure your child in the
event of an accident or sudden braking.
• On long journeys, we recommend frequent
stops: children tire very easily in child car seats
and need to move. It is recommended to let
your child in and out of the car from the pave-
ment side, not from the traffic road side.
• Do not remove any labels or brands from the
fabric cover; this to prevent damages to the
cover of the child car seat.
• Prolonged exposure of the child car seat to di-
rect sunlight may cause the materials or fabric
to fade.
• If the vehicle has been left in the sun, check
that the different parts of the child car seat are
not too hot: in such an event, to avoid burn
hazards, ensure the child car seat has cooled
down completely prior to seating the child.
• When the child car seat is not in use, it should
be left secured to the vehicle seat or stowed
in the car boot with the seat inclination ad-
juster handle completely inserted into the
lower part of the child car seat. An unsecured
child car seat may be a source of danger in the
event of an accident or sudden braking.
• Artsana declines all responsibility for the incor-
rect use of this product or any use that does not
follow these instructions carefully.

IMPORTANT WARNING

1. This is a "Universal" child restraint. It is type ap-
proved to European Regulation ECE R44/04 on
child restraint systems, amendment series 04.
it is intended for general use in vehicles, and it
will fit most, but not all car seats.
2. A correct fit is more likely if the vehicle manu-
facturer has declared that the vehicle is capa-
ble of accepting a "Universal" child restraint for
this age group.
3. This child restraint has been classified as "Uni-
versal" under more stringent conditions than
those that were applied to earlier designs not
displaying this notice.
4. Only suitable if the vehicle is fitted with a
3-point static or 3-point retractor safety belt,
type approved to UN/ECE Regulation No. 16,
or other equivalent standards.
5. If in doubt, consult either the child restraint
manufacturer or the retailer.
INSTRUCTIONS FOR USE
• Components
• Intended use of both item and vehicle seat,
restrictions and requirements
• Child car seat installation into the vehicle
• Warnings for correct child car seat installation
• Seating the child into the child car seat
• Adjusting the headrest height and harness
straps
• Adjusting the backrest inclination
• Maintenance
COMPONENTS (Figures 1-2-3)
Fig. 1 (Front view)
A. Headrest
B. Strap holes
C. Shoulder padding
D. Restraint harness straps
E. Restraint harness strap length adjustment
pushbutton
F. Restraint harness adjustment strap
G. Harness open/close buckle
H. Lining seat cover
I. Padded lap harness strap
J. Child car seat base frame
K. Seat
Fig. 2 (Back view)
L. Headrest adjustment pushbutton
M. Type approval labelling
N. Child car seat harness straps connection plate
Fig. 3 (Side view)
O. Seat inclination adjustment lever
P. Instruction booklet pocket
Q. Car safety belt horizontal strap guide
R. Car safety belt diagonal strap lock clamp
S. Installation instruction label
T Guide for inserting the diagonal part of the
car safety belt
INTENDED USE OF BOTH THE ITEM AND THE
VEHICLE SEAT, RESTRICTIONS AND REQUIRE-
MENTS
CAUTION! Please read and observe the following
instructions very carefully. They refer to both the
child car seat and the vehicle seat. Failure to com-
26