Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 Keyboard setup
Programming is carried out on the keyboard display. The following is a description of the procedure to start
programming the various menu items shown on the display.
4.1 Keys
To enter setup:
To move the cursor within the menus:
p revious line
/
previous and following value (in the parameters choice)
cursor
exit to previous menu
To exit setup: press
4.2 Selecting and inserting values
When a menu allows multiple choices, the selected item is indicated by the
If a numeric value is to be inserted, it should be confirmed by
inserted, and
operator of the error.
The individual menu items are not displayed when the previous choices make them unnecessary.
In case of a choice between two values (YES/NO type),
the right;
c onfirm selected (blinking) value;
4.3 Menu item s
Shown on display
f ollowing line
repeatedly.
to exit without saving. If the numeric value is invalid, an acoustic signal will warn the
Submenu
.
selects value on the left,
e nds without confirmation.
Description
Choice of menu and message language.
The selected language is indicated by the *
symbol.
Definition of devices connected to the
keyboard, see § 2.2 - Equipment that can be
connected to the DCK keyboard, page 5
Parameters for video line; see § 5 - Video
management, page 16
Acceptance
monitors,
Acceptance is a very practical way of limiting
keyboard operations, without having to make
use of further system passwords
Accepting
cameras; see § 4.4 - Accepting requests for
cameras, page 12
Page 10
enter the submenu indicated by the
symbol.
can be used to erase the last digit
s elects value on
of
requests
for
functions
and
multiplexers.
the
request
for
individual
MNVCDCK_0441
cameras,
Publicité
Chapitres
Table des Matières
