Responsibilities Of Employer, Tool Owner And Tool Operator - Hitachi N 3808AP Manuel D'instructions Et De Sécurité

English
(17) Never modify or alter a Stapler. Doing so may
cause it to malfunction and personal injuries may
result.
(18) When switching between SINGLE SEQUENTIAL
and CONTACT, disconnect the air hose and
remove all staples.
(19) When the hook is attached, operate only with
SINGLE SEQUENTIAL ACTUATION MECHANISM
and not with CONTACT ACTUATION MECHANISM.

RESPONSIBILITIES OF EMPLOYER, TOOL OWNER AND TOOL OPERATOR

1. Ensure that this MANUAL is available to operators
and personnel performing maintenance.
2. Select an appropriate switching device considering
the applications for which the Stapler is used.
3. Train the operator in the safe use of the Stapler as
described in this MANUAL.
4. Ensure that only persons who have read and
understand this MANUAL operate the Stapler.
5. Ensure that Staplers are used only when operators
and others in work area are wearing EYE
PROTECTION, and other appropriate personal
protective equipment such as HEAD, HEARING,
FOOT PROTECTION.
KEEP IT AVAILABLE FOR OTHERS!
8
SAFETY
WARNING
SAVE THIS MANUAL AND
— Continued
(20) Disconnect the air hose when affi xing the hook.
(21) Do not affi x the hook on high or unstable
locations. Also, do not affi x it to the body,
clothing, belt or other personal items.
6. Enforce the use of EYE PROTECTION by operators
and others in work area.
7. Ensure that Staplers are kept in safe working order as
described in this MANUAL.
8. Maintain Staplers properly.
9. Ensure that only qualifi ed personnel shall repair
Staplers.
10. Ensure that Staplers that require repair are removed
from service and that tags and physical segregation
are used as a means of control.