Dometic Midi Heki B Instructions De Montage page 18

Installing the Midi Heki
See fig. d
➤ Fasten the ventilation grille using the two screws 3.5 x 25 mm (1).
➤ Check the functions of the window:
– Open the roof light (see chapter "Using the temple version" on page 15).
– Adjust the insect and the black roller blind.
➤ Press the two cover caps (2) into the ventilation grille.
See fig. e
➤ Clip on the ventilation grille.
It needs to click in.
➤ Remove the protective film from both sides of the acrylic glass.
I
NOTE
If the protective film is exposed to sunlight for too long, it cannot be
taken off without leaving a residue.
➤ After installing, check the roof light works properly.
➤ If necessary, enter the new vehicle height and weight in the vehicle documents.
12
Midi Heki roof light
EN