Chauvet Professional COLORdash Batten-Quad 6 Guide De Référence Rapide page 3

COLORdash™ Batten-Quad 6 QRG
AC Plug
Replacing the
Fuse
DMX Linking
DMX Connection
Master/Slave
Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
Connection
AC Live
AC Neutral
AC Ground
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
The COLORdash™ Batten-Quad 6 will work with a DMX controller using
a regular DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
The COLORdash™ Batten-Quad 6 uses a regular DMX data connection for
its DMX personalities: 4 Ch, 6 Ch, 10 Ch, 24 Ch, and 28 Ch. See the User
Manual to connect and configure for DMX operation.
The COLORdash™ Batten-Quad 6 uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Before mounting this product, read the
mounting point per product. Make sure the mounting clamps are capable of
supporting the weight of the product. For our Chauvet line of mounting
clamps, go to www.trusst.com/productcategory/accessories-clamps/.
Mounting Clamp
Overhead Mounting
Button
<MENU> Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
Safety Cable
3
Screw Color
Brown Yellow/Brass
Blue
Safety Notes. Use at least one
Floor Mounting
Function
EN
Silver
Green