Prebena MOUNTAINE 950 Mode D'emploi page 47

PREBENA
Wilfried Bornemann GmbH & Co. KG
BEFESTIGUNGSTECHNIK – FASTENING TECHNOLOGY
6.3.4 The removable wheels or rubber shock absorbers must be mounted to the pressure
vessel supports, as shown in Figure 1 .
DO NOT PERMANENTLY MOUNT THE COMPRESSOR TO THE FLOOR OR THE
BASE PLATE!
1 - Shock absorber
2 - M10 Screw
3 - Nut М10
4 - M10 Washer
1 - Screw
2 - Washer
3 - Wheel
4 - Nut М12
5 - M12 Washer
Figure 1
6.3.5 Place the compressor on a horizontal flat surface in order to ensure better lubrication of the
moving parts and the complete drainage of the condensate. Make sure that the compressor
is installed on a flat, non-slip surface made of oil, fire and wear-resistant material.
1 - Castor
1 - Screw
2 - Inflated tires
3 - M12 Washer
4 - M12 Nut
7
1 - Steering wheel with brake
2 - Washer
3 - Disc
4 - M12 Nut