Location; Room Temperature; General Considerations - Red Sea REEFER Serie Mode D'emploi

2 Location

The first step in setting up the REEFER
Weight
The flooring directly below the system must be rated to support the
following weight:
Approximate total weight of system including water
Model Nano 170
Weight 180kg / 270kg /
400lb 595lb

Room temperature

Site selection is important for correct temperature maintenance.
We recommended that you keep the ambient room temperature a
comfortable and stable 22°C / 72°F. Avoid placing the tank in front of
an air conditioner, heating vents or direct sunlight. A well ventilated
room with moderate light is the best place to position the aquarium.
™ is to choose a suitable location.
250 350 450
375kg / 530kg / 680kg /
830lb 1170lb 1500lb
Accessibility
Ensure that there is at least 10cm / 4" of clearance behind the
REEFER ™ to allow easy access for installing/removing cables from the
sump as well as sufficient air circulation for a chiller (larger models
only). It is recommended to leave approximately 60cm/24" between
one of the sides of the aquarium and any adjacent walls or furniture
for access to the rear of the tank.

General considerations

Ensure that the area surrounding the aquarium is waterproof and
consider moving away anything that water might damage or may be
corroded by the salt.
NOTE: The REEEFER ™ system should not be moved when full of water.
ENG
5