Before Use - JB Systems PARTY BEAMS Mode D'emploi

ENGLISH
OPERATION MANUAL
Thank you for buying this JB Systems
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
 This extremely compact bar is equipped with 2 different light effects to create wonderful lightshows:
 8 LED projectors: each equipped with a 9 watt RGB LED for strong 7° beams
 4 Powerful cold white LEDs to create all kinds of strobe and blinder effects
 The 8 LED projectors can be pointed in different directions to create amazing chaotic beam effects!
 The fabulous preprogrammed shows have different effect combinations that can be controlled in different
ways:
 DMX-control: via 3, 9 or 14 channels.
 Standalone: sound activated (internal microphone) or automatic.
 Several bars can be connected in master/slave to create wonderful synchronized shows.
 3-digit LED display for easy menu navigation.
 Very low power consumption: max only 30W !
 IEC power in/out can be used to easily link several units.

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the cardboard box contains the following items:
 PARTY BEAMS
 Mains cable
 Operating instructions
JB SYSTEMS®
®
product. To take full advantage of all possibilities and for your own
1/55
USER MANUAL
PARTY BEAMS